PDF
ERNST NAGELREF: TECH202611f31d

ERNST NAGEL Citoborma 480 AB - 1988 - SN: CITOBORMM480AB

Available Now1988used
ERNST NAGEL Citoborma 480 AB - 1988 - SN: CITOBORMM480AB
1 / 4

Partager

Spécifications Techniques

Numéro de série

CITOBORMM480AB

Catégorie

Other Machines

Marque

ERNST NAGEL

Modèle

Citoborma 480 AB

Année

1988

Contacter via WhatsApp

Besoin de plus d'informations ?

Notre équipe est prête à vous aider avec les spécifications détaillées, les prix et organiser une visite.

Spécifications Techniques

ModèleCitoborma 480 AB
Puissance Requise380V / 400V 3-phase, 50 Hz
Dimensions850 × 580 × 1,500 mm

Description

Drilling Capacity & Spacing
• Number of Drilling Heads. 4 adjustable spindles (can operate with 1 to 4 drill bits installed).
• Maximum Pile / Stack Height. 60 mm.
• Supported Drill Bit Diameters. 2 mm to 10 mm standard (up to 20 mm depending on the chuck configuration).
• Distance Between Drill Bits. Adjustable from 45 mm to 285 mm.
• Total Hole Spacing Range. 6 mm to 410 mm across the sheet.

Worktable & Paper Handling
• Maximum Paper Width. 460 mm to 480 mm.
• Insertion / Throat Depth. Approximately 100 mm behind the drill bits (up to 270 mm depending on table stop settings).
• Table Movement. Sliding worktable with a tabulator and adjustable stops for multi-hole patterns.
• Stroke Operation. Power-assisted table lift activated by a foot pedal, equipped with a safety clutch mechanism and individual spindle height/drill-length compensation.

Dimensions, Weight & Power
• Dimensions (L × W × H). Approximately 850 × 580 × 1,500 mm (some configurations measure up to 1,000 × 700 × 1,500 mm).
• Net Weight. Approximately 210 kg to 275 kg.
• Electrical Supply. Typically 380V / 400V 3-phase, 50 Hz (some models are wired for 220V/230V).

Machines Similaires